info@navrekhasteel.com
Shop No.1, Gr Floor, Ram Sadan, Sant Sena Maharaj Marg, 2nd. Kumbharwada, Mumbai - 400004

Titanium Gr.5 Round Bars

Home Titanium

Gr.5 Titanium Round Bars, Titanium Gr.5 Bright Bar, ASTM A348 Titanium Gr.5 Hex Bar, Gr.5 Titanium Rectangular Bar, Titanium Gr.5 Hollow Bars Supplier in Mumbai, India.

Navrekha Steel is a customary exporter and stockist of Titanium Grade5 Round Bars, which shows resistance in a sour-fueloline environment.

Grade

Gr.5

UNS

R56400

WERKSTOFF NR.

3.7165

ASTM / ASME

A348 / SA348

Manufacturing Factory
Titanium Gr.5 Round Bars

Buy Gr.5 Titanium Round Bar, Titanium Gr.5 Square Bar, Titanium Gr.5 Flat Bar, UNS R56400 Threaded Bar, ASTM A348 Type Gr.5 Rod, titanium alloy Gr.5 Rods Dealer, DIN 3.7165 Forged Bar, Ti alloy Gr.5 Bars, Titanium Gr.5 Hot Rolled Bar Manufacturer in India.

This steel may be in addition strengthened through cold working previous to precipitation hardening. This UNS R56400 Flat Bars is feasible, however, to expand a magnetic layer at the surface of the material at some stage in processing. Resistance to hydrogen sulphide makes this steel beneficial in sour-fueloline environments making it extraordinarily famous within the oil patch. This steel is utilized in Pump Shafts, Valve Components, and more. The thermal processing on this steel used to impact precipitation is generally known as age hardening or ageing. This steel have an extra tendency in the direction of strain-corrosion cracking in a few environments while within the age-hardened condition.

This steel has the mixture of very low corrosion rates in excessive-pace sea water and excessive strength.This Titanium WNR 3.7165 Square Bars is mainly appropriate for shafts of centrifugal pumps in marine service. Self-age-hardening could be installation within the cast a part of this product, main to strain and feasible cracking. The addition of aluminium and titanium to an already sturdy nickel-copper base on this product adds strength and hardness. This product has high-quality resistance to chloride-ion strain-corrosion cracking. This product may be in addition strengthened through cold working earlier than the precipitation hardening.

The strength of this product is maintained to 1200 Degree F however remains ductile and hard right all the way down to temperatures of four hundred Degree F. Aluminium and copper on this product perhaps selectively oxidized at some stage in heating, leaving a magnetic nickel-rich film at the outdoor of the piece. ThisTi 6AL - 4V Threaded Bars is immune to corrosion and acids, due to the fact a few alloys can face up to in natural oxygen. This product gives high-quality corrosion resistance in a number environments such as hydrofluoric acid and sulphuric acid. In stagnant or sluggish-shifting sea water, fouling may also arise observed through pitting on this product, however this pitting slows down after a reasonably fast preliminary attack.

Standard Quality Specification Of Titanium Gr.5 Round Bars

Dimensions DIN, EN, ASTM, JIS, ASME, BS, AISI
Standard ASTM A348, ASME SA348
Hex Bar size 2-100mm A/F
Round bar size Diameter: 3-~800mm
Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Square bar size 4 to 100mm
Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Rectangular Bars Section 3.0 to 12.0mm thickness
Threaded Bar Billet Size 1/2 to 495mm Diameter
Rectangles Size 33 x 30mm to 295 x 1066mm
Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Surface Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished
Condition Hardened & tempered, annealed
Technique Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod
Processing Bar cutting to 650mm
Form Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc.

Available Types Of Titanium Gr.5 Round Bars

Titanium Gr.5 Flat Bar

Titanium Gr.5 Flat Bar

Titanium Gr.5 Flat Bar

Titanium 3.7165 Flat Bar

Gr.5 Ti alloy Flat Bar

DIN 3.7165 Flat Bars

Titanium UNS R56400 Flat Bar

ASTM A348 Titanium Gr.5 Flat Bars

ASME SA348 Titanium Gr.5 Flat Bar

Titanium Gr.5 Square Bar

Titanium Gr.5 Square Bar

Titanium Gr.5 Square Bar

Titanium 3.7165 Square Bar

Gr.5 Ti alloy Square Bar

DIN 3.7165 Square Bars

Titanium UNS R56400 Square Bars

ASTM A348 Titanium Gr.5 Square Bar

ASME SA348 Titanium Gr.5 Square Bar

Titanium Gr.5 Bright Bar

Titanium Gr.5 Bright Bar

Titanium Gr.5 Bright Bar

Titanium 3.7165 Bright Bar

Gr.5 Titanium alloy Bright Bars

DIN 3.7165 Bright Bars

Titanium UNS R56400 Bright Bar

ASTM A348 Titanium Gr.5 Bright Bar

ASME SA348 Titanium Gr.5 Bright Bar

Titanium Gr.5 Hex Bar

Titanium Gr.5 Hex Bar

Titanium Gr.5 Hex Bar

Titanium 3.7165 Hexagonal Bar

Gr.5 Titanium Hex Bar

DIN 3.7165 Hexagonal Bars

Titanium UNS R56400 Hex Bars

ASTM A348 Titanium Gr.5 Hex Bars

ASME SA348 Titanium Gr.5 Hexagonal Bar

Titanium Gr.5 Rectangular Bar

Titanium Gr.5 Rectangular Bar

Titanium Gr.5 Rectangular Bar

Titanium 3.7165 Rectangular Bar

Gr.5 Ti alloy Rectangular Bar

DIN 3.7165 Rectangular Bar

Titanium UNS R56400 Rectangular Bar

ASTM A348 Titanium Gr.5 Rectangular Bars

ASME SA348 Titanium Gr.5 Rectangular Bar

Titanium Gr.5 Forged Bar

Titanium Gr.5 Forged Bar

Titanium Gr.5 Forged Bar

Titanium 3.7165 Forged Bars

Gr.5 Titanium alloy Forged Bar

DIN 3.7165 Forged Bars

Titanium UNS R56400 Forged Bars

ASTM A348 Titanium Gr.5 Forged Bar

ASME SA348 Titanium Gr.5 Forged Bar

Equivalent Grade Of Gr.5 Titanium Round Bars

STANDARD UNS WNR.
Titanium Gr 5 R56400 3.7165

Titanium Gr.5 Round Bars Surface Finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

Manufacturer of Titanium Gr.5 Round Bars, Titanium Gr.5 Hex Bar Wholesaler, Gr.5 Titanium Flat Bar Price in India.

Contact Us or click on request a quote button to get our competitive prices for Gr.5 Titanium Round Bars.

request a quote

Check ASTM A348 Titanium Gr.5 Round Bars & Gr.5 Titanium Threaded Bar Weight Chart & Dimensions.


Dimensions Of Hot Rolled Titanium Gr.5 Round Bar

Diameter or
Width
(mm)		 Weight per meter Sectional Area Perimeter
Square
(kg)		 Round
(kg)		 Square
(cm²)		 Round
(cm²)		 Square
(cm)		 Round
(cm)
5.0 0.20 0.15 0.25 0.20 2.0 1.57
5.5 0.24 0.19 0.30 0.24 2.2 1.78
6.0 0.28 0.22 0.36 0.28 2.4 1.88
7.0 0.38 0.30 0.49 0.38 2.8 2.20
8.0 0.50 0.39 0.64 0.50 3.2 2.51
9.0 0.64 0.50 0.81 0.64 3.6 2.83
10 0.73 0.63 1.00 0.79 4.0 3.14
11 0.95 0.75 1.21 0.95 4.4 3.46
12 1.13 0.89 1.44 1.13 4.8 3.77
14 1.54 1.21 1.96 1.54 5.6 4.40
16 2.01 1.58 2.56 2.01 6.4 5.03
18 2.54 2.00 3.24 2.54 7.2 5.65
20 3.14 2.47 4.00 3.14 8.0 6.28
22 3.80 2.98 4.84 3.80 8.8 6.91
25 4.91 3.85 6.25 4.91 10.0 7.85
28 6.15 4.83 7.84 6.16 11.2 8.80
32 8.04 6.31 10.24 8.04 12.8 10.05
36 10.17 7.99 12.96 10.18 14.4 11.31
40 12.56 9.86 16.00 12.57 16.0 12.57
45 15.90 12.49 20.25 15.90 18.0 14.14
50 19.62 15.41 25.00 19.64 20.0 15.71
56 24.62 19.34 31.36 24.63 22.4 17.59
63 31.16 24.47 36.69 31.17 25.2 19.79
71 39.57 31.08 50.41 39.59 28.4 22.31
80 50.24 39.46 64.00 50.27 32.0 25.13

Titanium Gr.5 Round Bar Size Chart

Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.625 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.625 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

Standard Sizes Titanium Gr.5 Hex Bar

Size in Inches Wt per Ft Wt per 12′
3/16″ 0.104 1.248
1/4″ 0.180 2.160
5/16″ 0.290 3.480
3/8″ 0.420 4.920
7/16″ 0.560 6.72
1/2″ 0.740 8.880
9/16″ 0.930 11.16
5/8″ 1.150 13.80
11/16″ 1.390 16.68
3/4″ 1.660 19.92
13/16″ 1.950 23.40
7/8″ 2.300 27.60
15/16″ 2.600 31.20
1″ 2.90 34.80
1-1/16″ 3.30 39.60
1-1/8″ 3.700 44.40
1-1/4″ 4.600 55.20
1-5/16″ 5.100 61.20
1-3/8″ 5.600 67.20
1-7/16″ 6.100 73.20
1-1/2″ 6.600 79.20
1-5/8″ 7.800 93.60
1-3/4″ 9.030 108.36
1-7/8″ 10.400 124.80
2″ 11.80 141.60
2-1/4″ 14.920 179.04
2-3/8″ 16.920 203.04
2-1/2″ 18.42 221.04
3″ 26.53 318.36

Titanium Gr.5 Flat Bar Size

Flat Bar Sizes in mm Flat Bar Size (inch) Flat Bar Thickness (mm) Flat Bar Thickness (in Inches)
22 7/8 17 & 18 2/3 – 5/7
25 1 5 to 20 3/16 – 4/5
30 1-3/16 5 to 20 3/16 – 4/5
32 1-1/4 6 to 20 1/4 – 4/5
35 1-3/8 5 to 20 3/16 – 3/16
40 1-4/7 5 to 25 3/16 – 1
45 1-7/9 5 to 25 3/16 – 1
47 1-6/7 17,25 & 32 2/3, 1 & 1-1/4
50 2 5 to 32 3/16 – 1-1/4
55 2-1/16 5 to 25 3/16 – 1
57 2-1/4 32 1-1/4
60 2-3/8 5 to 35 3/16 – 1-3/8
63 2-1/2 10 to 30 3/8 – 1-3/16
65 2-5/9 10 to 30 & 35 3/8 – 1-3/16, & 1-3/8
70 2-3/4 6 to 25 & 40 1/4 – 1, & 1-4/7
75 3 8 to 25 5/16 – 1
80 3-1/8 8 to 20 5/16 – 4/5
90 3-1/2 8 to 20 5/16- 4/5
100 4 8, 10, 12 5/16, 3/8, 1/2

Size chart of Titanium Gr.5 Square Bar

Square bar Size KG’s per Metre Standard Length (metres) Colour Code
10 x 10 0.81 6.0 Yellow
12 x 12 1.16 6.0 Pink
16 x 16 2.06 6.0 Grey
20 x 20 3.22 6.0 Green
25 x 25 5.03 6.0 Purple
32 x 32 8.24 6.0 Orange
40 x 40 12.8 6.0 Yellow
50 x 50 20.12 6.0 Green

Gr.5 Titanium Round Bar Weight Chart

Diameter Weight Chart Dia Weight Chart
(mm) per metre (kg) (in) per metre (kg)
3mm 0.06 1/8″ 0.06
4mm 0.10 3/16″ 0.14
5mm 0.16 1/4″ 0.25
6mm 0.22 5/16″ 0.39
7mm 0.30 3/8″ 0.56
8mm 0.40 7/16″ 0.77
10mm 0.62 1/2″ 1.00
12mm 0.89 9/16″ 1.22
14mm 1.22 5/8″ 1.56
15mm 1.40 11/16″ 1.89
16mm 1.59 3/4″ 2.25
18mm 2.01 7/8″ 3.07
20mm 2.48 1″ 4.03
22mm 3.00
24mm 3.57
25mm 3.88

Chemical Composition of Gr.5 Titanium Round Bars

Grade Al Fe O Ti V
Titanium Gr 5 6 0.25 0.2 90 4

Mechanical Properties of Titanium Gr.5 Round Bars

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Most Famous Types Of Titanium Gr.5 Round Bars

  • Titanium Gr.5 Round Bar
  • Titanium Gr.5 Half-Round Bar
  • Titanium Gr.5 Threaded Bar
  • Titanium Gr.5 Square Bar
  • ASTM A348 Titanium Gr.5 Round Bar
  • Titanium Gr.5 Rods Distributor
  • Gr.5 Titanium Triangular Bars
  • Ti alloy Gr.5 Rods
  • Titanium Gr.5 Triangular Bars Stockist
  • ASTM A348 Gr.5 Titanium Cold Rolled Bar
  • Titanium Gr.5 Precision Ground Bar
  • Titanium Gr.5 Flat Bar
  • Titanium Gr.5 T-Bar
  • Titanium Gr.5 Threaded Bar
  • ASTM A348 Type Gr.5 Rod
  • Titanium Gr.5 Polished Bar
  • Titanium Gr.5 Bright Bar
  • Titanium Gr.5 Flat Bar Rolled Edge
  • titanium alloy Gr.5 Hot Rolled Bar Exporter
  • Titanium Gr.5 Hollow Bar
  • Titanium Gr.5 T-Bar
  • Gr.5 Titanium Hexagon Bar Manufacturer
  • Titanium Gr.5 Polished Flat Bar
  • Gr.5 Titanium Hollow Bar
  • UNS R56400 Bars
  • Titanium Gr.5 Hexagonal Bar
  • 3.7165 Bright Bar
  • Titanium Gr.5 Flat Bars
  • titanium alloy Gr.5 Hollow Bar
  • Gr.5 Titanium Hex Bar
  • ASTM A348 SUS Gr.5 Precision Ground Bar
  • Titanium Gr.5 Black Bar
  • Ti alloy Gr.5 Round Rod
  • Titanium Gr.5 Rods Manufacturer
  • Titanium Gr.5 Rods
  • Gr.5 Titanium Half Round Bar Manufacturer
  • titanium alloy Gr.5 Cold Drawn Round Bar
  • Gr.5 Titanium Forged Bars
  • Titanium Gr.5 Hot Rolled Bar
  • Titanium Gr.5 Cold Rolled Bar Stockholder
  • Gr.5 Titanium Hex Bar Stockist
  • Gr.5 Titanium Bar
  • TitaniumGr.5 Hollow Bar
  • Titanium Gr.5 Square Bar
  • DIN 3.7165 Round Bars
  • Titanium Gr.5 Forged Bars
  • Titanium Gr.5 Hollow Bar Supplier in Mumbai
  • Titanium Gr.5 Black Bar

Titanium Gr.5 Round Bars SUPPLYING TO FOLLOWING REGIONS & COUNTRIES