Alloy Steel F12 Round Bars, Alloy Steel F12 Rod, F12 Alloy Steel Round Bar

This steel is likewise high quality for excessive temperature provider due to its desirable mechanical properties.This product shows excessive strength and resistance to various forms of corrosions, along in company of having that from aqueous environments. This Steel F12 Hollow Bars is the steel of desire for applications within the temperature variety of as much as approximately 900 Degree C. This product is significantly inured to the impact of sulphurous gases, in which predisposition to carbonization in abridged gases is extraordinarily low. This product gives a huge type of benefits along in company of having first rate resistance oxidation to 1500 Degree F (816 Degree C).

This product has better creep and strain rupture properties. This product is utilized in dyestuffs, maximum natural chemical compounds plus a huge type of inorganic chemical compounds. This Alloy Steel F12 Hexagonal Bars has better carbon content, to offer progressed excessive temperature strength. This product have to be taken into consideration for applications requiring intermittent heating. This product is stabilized in opposition to chromium carbide formation by means of having the aid of using the addition of titanium. This product is high quality for excessive temperature provider due to its desirable mechanical properties.This steel is used for welding below situations which save you a post-weld anneal.

This product has a titanium addition of as several instances the carbon content. This product isn't always challenge to weld decay (inter-granular corrosion) while uncovered to mildly corrosive environments.It also can be slit for your preferred width. This steel has first rate resistance to inter-granular corrosion and additionally has first rate weldability. This steel is consequently the standard consumable for welding. This Alloy Steel F12 Triangular Bars may additionally be taken into consideration for exposures in which sensitization and inter-granular corrosion are concerns. This bring about better expanded temperature allowable stresses for this stabilized this steel for several applications. This steel has oxidation resistant as much as 1600 Degree F.

Dimensions	DIN, EN, ASTM, JIS, ASME, BS, AISI
Standard	ASTM A182 , ASME SA182
Hex Bar size	2-100mm A/F
Round bar size	Diameter: 3-~800mm
Flat bar size	Thickness: 2 -100mm
Width: 10 to 500mm
Angle bar size	3mm20mm20mm~12mm100mm100mm
Square bar size	4 to 100mm
Channel Bar	80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Rectangular Bars Section	3.0 to 12.0mm thickness
Threaded Bar Billet Size	1/2 to 495mm Diameter
Rectangles Size	33 x 30mm to 295 x 1066mm
Hollow Bar	32mm OD x 16mm ID to 250mm OD x 200mm ID)
Tolerance	H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish	Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Surface	Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished
Condition	Hardened & tempered, annealed
Technique	Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod
Processing	Bar cutting to 650mm
Form	Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc.

Dimensions

DIN, EN, ASTM, JIS, ASME, BS, AISI

Standard

ASTM A182 , ASME SA182

Hex Bar size

2-100mm A/F

Round bar size

Diameter: 3-~800mm

Flat bar size

Thickness: 2 -100mm

Width: 10 to 500mm

Angle bar size

3mm*20mm*20mm~12mm*100mm*100mm

Square bar size

4 to 100mm

Channel Bar

80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness

Rectangular Bars Section

3.0 to 12.0mm thickness

Threaded Bar Billet Size

1/2 to 495mm Diameter

Rectangles Size

33 x 30mm to 295 x 1066mm

Hollow Bar

32mm OD x 16mm ID to 250mm OD x 200mm ID)

Tolerance

H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

Finish

Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Surface

Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished

Condition

Hardened & tempered, annealed

Technique

Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod

Processing

Bar cutting to 650mm

Form

Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc.

STANDARD	UNS	WERKSTOFF NR.
Alloy Steel F12	K11562/K11564	1.7335

STANDARD

UNS

WERKSTOFF NR.

Alloy Steel F12

K11562/K11564

1.7335

Diameter or Width (mm)	Weight per meter	Sectional Area	Perimeter
5.0	0.20	0.15	0.25	0.20	2.0	1.57
5.5	0.24	0.19	0.30	0.24	2.2	1.78
6.0	0.28	0.22	0.36	0.28	2.4	1.88
7.0	0.38	0.30	0.49	0.38	2.8	2.20
8.0	0.50	0.39	0.64	0.50	3.2	2.51
9.0	0.64	0.50	0.81	0.64	3.6	2.83
10	0.73	0.63	1.00	0.79	4.0	3.14
11	0.95	0.75	1.21	0.95	4.4	3.46
12	1.13	0.89	1.44	1.13	4.8	3.77
14	1.54	1.21	1.96	1.54	5.6	4.40
16	2.01	1.58	2.56	2.01	6.4	5.03
18	2.54	2.00	3.24	2.54	7.2	5.65
20	3.14	2.47	4.00	3.14	8.0	6.28
22	3.80	2.98	4.84	3.80	8.8	6.91
25	4.91	3.85	6.25	4.91	10.0	7.85
28	6.15	4.83	7.84	6.16	11.2	8.80
32	8.04	6.31	10.24	8.04	12.8	10.05
36	10.17	7.99	12.96	10.18	14.4	11.31
40	12.56	9.86	16.00	12.57	16.0	12.57
45	15.90	12.49	20.25	15.90	18.0	14.14
50	19.62	15.41	25.00	19.64	20.0	15.71
56	24.62	19.34	31.36	24.63	22.4	17.59
63	31.16	24.47	36.69	31.17	25.2	19.79
71	39.57	31.08	50.41	39.59	28.4	22.31
80	50.24	39.46	64.00	50.27	32.0	25.13

Diameter or
Width
(mm)

Weight per meter

Sectional Area

Perimeter

Square
(kg)

Round
(kg)

Square
(cm²)

Round
(cm²)

Square
(cm)

Round
(cm)

5.0

0.20

0.15

0.25

0.20

2.0

1.57

5.5

0.24

0.19

0.30

0.24

2.2

1.78

6.0

0.28

0.22

0.36

0.28

2.4

1.88

7.0

0.38

0.30

0.49

0.38

2.8

2.20

8.0

0.50

0.39

0.64

0.50

3.2

2.51

9.0

0.64

0.50

0.81

0.64

3.6

2.83

0.73

0.63

1.00

0.79

4.0

3.14

0.95

0.75

1.21

0.95

4.4

3.46

1.13

0.89

1.44

1.13

4.8

3.77

1.54

1.21

1.96

1.54

5.6

4.40

2.01

1.58

2.56

2.01

6.4

5.03

2.54

2.00

3.24

2.54

7.2

5.65

3.14

2.47

4.00

3.14

8.0

6.28

3.80

2.98

4.84

3.80

8.8

6.91

4.91

3.85

6.25

4.91

10.0

7.85

6.15

4.83

7.84

6.16

11.2

8.80

8.04

6.31

10.24

8.04

12.8

10.05

10.17

7.99

12.96

10.18

14.4

11.31

12.56

9.86

16.00

12.57

16.0

12.57

15.90

12.49

20.25

15.90

18.0

14.14

19.62

15.41

25.00

19.64

20.0

15.71

24.62

19.34

31.36

24.63

22.4

17.59

31.16

24.47

36.69

31.17

25.2

19.79

39.57

31.08

50.41

39.59

28.4

22.31

50.24

39.46

64.00

50.27

32.0

25.13

Metric	US Bar	ASTM/ Canadian	Japanese
Bar Size	Diam. (mm)	Bar Size	Diam. (Inch)	Bar Size	Diam. (mm2)	Bar Size	Diam. (mm)
5	5	#2	0.250	10M	100	6	6
5.5	5.5	#3	0.375	15M	200	10	10
6	6	#4	0.500	20M	300	13	13
7	7	#5	0.625	25M	500	16	16
8	8	#6	0.750	30M	700	19	19
9	9	#7	0.875	35M	1000	22	22
10	10	#8	1.000	45M	1500	25	25
11	11	#9	1.125	55M	2500	29	29
12	12	#10	1.250			32	32
14	14	#11	1.375			35	35
16	16	#12	1.500			38	38
18	18	#13	1.625			41	41
20	20	#14	1.750			44	44
22	22	#15	1.875			48	48
25	25	#16	2.000			51	51
28	28	#18	2.250			57	57
32	32
36	36
40	40
44	44
50	50

Metric

US Bar

ASTM/ Canadian

Japanese

Bar Size

Diam. (mm)

Bar Size

Diam. (Inch)

Bar Size

Diam. (mm2)

Bar Size

Diam. (mm)

0.250

10M

100

5.5

0.375

15M

200

0.500

20M

300

0.625

25M

500

0.750

30M

700

0.875

35M

1000

1.000

45M

1500

1.125

55M

2500

#10

1.250

#11

1.375

#12

1.500

#13

1.625

#14

1.750

#15

1.875

#16

2.000

#18

2.250

Size in Inches	Wt per Ft	Wt per 12′
3/16″	0.104	1.248
1/4″	0.180	2.160
5/16″	0.290	3.480
3/8″	0.420	4.920
7/16″	0.560	6.72
1/2″	0.740	8.880
9/16″	0.930	11.16
5/8″	1.150	13.80
11/16″	1.390	16.68
3/4″	1.660	19.92
13/16″	1.950	23.40
7/8″	2.300	27.60
15/16″	2.600	31.20
1″	2.90	34.80
1-1/16″	3.30	39.60
1-1/8″	3.700	44.40
1-1/4″	4.600	55.20
1-5/16″	5.100	61.20
1-3/8″	5.600	67.20
1-7/16″	6.100	73.20
1-1/2″	6.600	79.20
1-5/8″	7.800	93.60
1-3/4″	9.030	108.36
1-7/8″	10.400	124.80
2″	11.80	141.60
2-1/4″	14.920	179.04
2-3/8″	16.920	203.04
2-1/2″	18.42	221.04
3″	26.53	318.36

Size in Inches

Wt per Ft

Wt per 12′

3/16″

0.104

1.248

1/4″

0.180

2.160

5/16″

0.290

3.480

3/8″

0.420

4.920

7/16″

0.560

6.72

1/2″

0.740

8.880

9/16″

0.930

11.16

5/8″

1.150

13.80

11/16″

1.390

16.68

3/4″

1.660

19.92

13/16″

1.950

23.40

7/8″

2.300

27.60

15/16″

2.600

31.20

1″

2.90

34.80

1-1/16″

3.30

39.60

1-1/8″

3.700

44.40

1-1/4″

4.600

55.20

1-5/16″

5.100

61.20

1-3/8″

5.600

67.20

1-7/16″

6.100

73.20

1-1/2″

6.600

79.20

1-5/8″

7.800

93.60

1-3/4″

9.030

108.36

1-7/8″

10.400

124.80

2″

11.80

141.60

2-1/4″

14.920

179.04

2-3/8″

16.920

203.04

2-1/2″

18.42

221.04

3″

26.53

318.36

Flat Bar Sizes in mm	Flat Bar Size (inch)	Flat Bar Thickness (mm)	Flat Bar Thickness (in Inches)
22	7/8	17 & 18	2/3 – 5/7
25	1	5 to 20	3/16 – 4/5
30	1-3/16	5 to 20	3/16 – 4/5
32	1-1/4	6 to 20	1/4 – 4/5
35	1-3/8	5 to 20	3/16 – 3/16
40	1-4/7	5 to 25	3/16 – 1
45	1-7/9	5 to 25	3/16 – 1
47	1-6/7	17,25 & 32	2/3, 1 & 1-1/4
50	2	5 to 32	3/16 – 1-1/4
55	2-1/16	5 to 25	3/16 – 1
57	2-1/4	32	1-1/4
60	2-3/8	5 to 35	3/16 – 1-3/8
63	2-1/2	10 to 30	3/8 – 1-3/16
65	2-5/9	10 to 30 & 35	3/8 – 1-3/16, & 1-3/8
70	2-3/4	6 to 25 & 40	1/4 – 1, & 1-4/7
75	3	8 to 25	5/16 – 1
80	3-1/8	8 to 20	5/16 – 4/5
90	3-1/2	8 to 20	5/16- 4/5
100	4	8, 10, 12	5/16, 3/8, 1/2

Flat Bar Sizes in mm

Flat Bar Size (inch)

Flat Bar Thickness (mm)

Flat Bar Thickness (in Inches)

7/8

17 & 18

2/3 – 5/7

5 to 20

3/16 – 4/5

1-3/16

5 to 20

3/16 – 4/5

1-1/4

6 to 20

1/4 – 4/5

1-3/8

5 to 20

3/16 – 3/16

1-4/7

5 to 25

3/16 – 1

1-7/9

5 to 25

3/16 – 1

1-6/7

17,25 & 32

2/3, 1 & 1-1/4

5 to 32

3/16 – 1-1/4

2-1/16

5 to 25

3/16 – 1

2-1/4

1-1/4

2-3/8

5 to 35

3/16 – 1-3/8

2-1/2

10 to 30

3/8 – 1-3/16

2-5/9

10 to 30 & 35

3/8 – 1-3/16, & 1-3/8

2-3/4

6 to 25 & 40

1/4 – 1, & 1-4/7

8 to 25

5/16 – 1

3-1/8

8 to 20

5/16 – 4/5

3-1/2

8 to 20

5/16- 4/5

100

8, 10, 12

5/16, 3/8, 1/2

Square bar Size	KG’s per Metre	Standard Length (metres)	Colour Code
10 x 10	0.81	6.0	Yellow
12 x 12	1.16	6.0	Pink
16 x 16	2.06	6.0	Grey
20 x 20	3.22	6.0	Green
25 x 25	5.03	6.0	Purple
32 x 32	8.24	6.0	Orange
40 x 40	12.8	6.0	Yellow
50 x 50	20.12	6.0	Green

Square bar Size

KG’s per Metre

Standard Length (metres)

Colour Code

10 x 10

0.81

6.0

Yellow

12 x 12

1.16

6.0

Pink

16 x 16

2.06

6.0

Grey

20 x 20

3.22

6.0

Green

25 x 25

5.03

6.0

Purple

32 x 32

8.24

6.0

Orange

40 x 40

12.8

6.0

Yellow

50 x 50

20.12

6.0

Green

Diameter	Weight Chart	Dia	Weight Chart
(mm)	per metre (kg)	(in)	per metre (kg)
3mm	0.06	1/8″	0.06
4mm	0.10	3/16″	0.14
5mm	0.16	1/4″	0.25
6mm	0.22	5/16″	0.39
7mm	0.30	3/8″	0.56
8mm	0.40	7/16″	0.77
10mm	0.62	1/2″	1.00
12mm	0.89	9/16″	1.22
14mm	1.22	5/8″	1.56
15mm	1.40	11/16″	1.89
16mm	1.59	3/4″	2.25
18mm	2.01	7/8″	3.07
20mm	2.48	1″	4.03
22mm	3.00
24mm	3.57
25mm	3.88

Diameter

Weight Chart

Dia

Weight Chart

(mm)

per metre (kg)

(in)

per metre (kg)

3mm

0.06

1/8″

0.06

4mm

0.10

3/16″

0.14

5mm

0.16

1/4″

0.25

6mm

0.22

5/16″

0.39

7mm

0.30

3/8″

0.56

8mm

0.40

7/16″

0.77

10mm

0.62

1/2″

1.00

12mm

0.89

9/16″

1.22

14mm

1.22

5/8″

1.56

15mm

1.40

11/16″

1.89

16mm

1.59

3/4″

2.25

18mm

2.01

7/8″

3.07

20mm

2.48

1″

4.03

22mm

3.00

24mm

3.57

25mm

3.88

Grade	C	Mn	P	S	Si	Ni	Ch	Mo	Cb
F12	0.05-0.15	0.30-0.60	0.045	0.045	0.50 max	-	0.80-1.25	0.44-0.65	-

Grade

F12

0.05-0.15

0.30-0.60

0.045

0.50 max

0.80-1.25

0.44-0.65

Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Hardness
Rockwell B (HR B) max	Brinell (HB) max
F12	415	220	20	-	121-174

Grade

Tensile Strength (MPa) min

Yield Strength 0.2% Proof (MPa) min

Elongation (% in 50mm) min

Hardness

Rockwell B (HR B) max

Brinell (HB) max

F12

415

220

121-174

CD	Cold drawn	P	Polished
BD	Bright drawn	SRE	Slit rolled edge
CG	Centreless ground	HF	Hot finished
CF	Cold finished	HRAP	Hot rolled annealed and pickled
P&T	Peeled and turned	RT	Rough turned/peeled
ST	Smooth turned	PR	Peeled and reeled

+91 99300 30436

Alloy Steel F12 Round Bars

F12 Alloy Steel Round Bars, Alloy Steel F12 Bright Bar, ASTM A182 Alloy Steel F12 Hex Bar, F12 Alloy Steel Rectangular Bar, Alloy Steel F12 Hollow Bars Supplier in Mumbai, India.

Grade

UNS

WERKSTOFF NR.

ASTM / ASME

Buy F12 Alloy Steel Round Bar, Alloy Steel F12 Square Bar, Crom. F12 Flat Bar, UNS K11562 Threaded Bar, ASTM A182 Type F12 Rod, Chrome Moly F12 Rods Dealer, DIN 1.7335 Forged Bar, Crmo. F12 Bars, Alloy Steel F12 Hot Rolled Bar Manufacturer in India.

Standard Quality Specification Of Alloy Steel F12 Round Bars

Available Types Of Alloy Steel F12 Round Bars

Alloy Steel F12 Flat Bar

Alloy Steel F12 Square Bar

Alloy Steel F12 Bright Bar

Alloy Steel F12 Hex Bar

Alloy Steel F12 Rectangular Bar

Alloy Steel F12 Forged Bar

Equivalent Grade Of F12 Alloy Steel Round Bars

Alloy Steel F12 Round Bars Surface Finish

Manufacturer of Alloy Steel F12 Round Bars, Alloy Steel F12 Hex Bar Wholesaler, F12 Alloy Steel Flat Bar Price in India.

Check ASTM A182 Alloy Steel F12 Round Bars & F12 Alloy Steel Threaded Bar Weight Chart & Dimensions.

Dimensions Of Hot Rolled Alloy Steel F12 Round Bar

Alloy Steel F12 Round Bar Size Chart

Standard Sizes Alloy Steel F12 Hex Bar

Alloy Steel F12 Flat Bar Size

Size chart of Alloy Steel F12 Square Bar

F12 Alloy Steel Round Bar Weight Chart

Chemical Composition of F12 Alloy Steel Round Bars

Mechanical Properties of Alloy Steel F12 Round Bars

Most Famous Types Of Alloy Steel F12 Round Bars

Alloy Steel F12 Round Bars SUPPLYING TO FOLLOWING REGIONS & COUNTRIES